CHIMNEY INSPECTIONS

CHIMNEY INSPECTION LEVELS

The NFPA (National Fire Protection Agency) procedure defines three levels of inspection according to the circumstances inwhich the inspection is needed. A Level I Inspection is the most basic type of inspection. A Level II and Level III Inspections are progressively more detailed and thorough.

Our home inspection does not include any of the chimney inspection levels, as listed below. We suggest all such inspections be performed by qualified chimney specialists.

A Level I Inspection is generally limited to readily accessible areas of the chimney structure, with additional requirements to insure the flue is clear. Readily accessible areas are those areas that can be reached for inspection or maintenance without the use of tools or ladders. A Level I Inspection will include checking the basic appliance installation and connection, checking readily accessible portions of the chimney structure and flue, and determining that the flue is not obstructed.

A Level I Inspection is the recommended level of inspection:

  • During annual chimney inspections
  • During routine service of the venting system, including chimney sweeping
  • Upon direct replacement of a connected appliance with one of similar type
  • At any other time an inspection is warranted, and conditions of use of the venting system are not changing

A Level II Inspection is generally limited to accessible areas of the chimney structure and appliance installation. Accessible areas are those that can be reached without destructive action to the building or building finish. Access may require the movement or opening of doors and panels, and may require the use of common hand tools or ladders. A Level II Inspection will include all portions of a Level I Inspection as well as accessible areas of the chimney structure, including areas within accessible attics, basements and crawl spaces. In addition, a Level II Inspection will include an examination of the chimney interior by video scanning or other comparable means of inspection. The inspector should also determine that the flue is properly sized for the connected appliance(s).

A Level II Inspection is the recommended level of inspection:

  • Upon addition or removal of one or more connected appliances, or replacement of an appliance with one of dissimilar type, input rating or efficiency.
  • Prior to relining or replacement of flue lining.
  • Upon sale or transfer of the property
  • After an operating malfunction or external event likely to have caused damage to the chimney.

A Level III Inspection includes all portions of a Level I and a Level II Inspection as well as examination of non-accessible areas of the chimney structure that are reasonably suspected of containing hazards. Non-accessible areas are those areas that cannot be reached without damage or destruction to the chimney, building or building finish, or areas that would require special tools to reach. Examination of non-accessible areas should be limited to suspect problem areas. In as much as inspection of these non-accessible areas will likely result in damage to the building the inspector and homeowner should discuss these details beforehand.

A Level III Inspection is the recommended level of inspection:

  • Where necessary for the investigation of an incident which has caused damage to the chimney or building.
  • Where a hazard detected or suspected as the result of a Level I or II Inspection cannot be fully evaluated without access to concealed areas.

As you can see, not all inspections are created equal, and the requirements of the inspection change with the circumstances giving rise to the inspection. The NFPA Inspection procedure details for the homeowner and the inspector what parts of the chimney should be inspected under a given set of circumstances.

All original content on these pages is fingerprinted and certified by Digiprove